505 replies to this topic

[Reapers Ashes]

images were removed sorry for the inconvenience.

Edited by deathfearsnone, 28 June 2012 - 11:57 PM.

[UltraRobbie]

Wow.

That looks pretty awesome! The theming is good too

[HCL]

Nice!

I expect we'll be seeing this on Youtube pretty soon.

Those tunnels are very good but they might look better on the bottoms of the drops.

[The BeastFan]

This looks pretty decent. I'm not a big fan of the layout. I would have done a swooping drop on the 2nd hill. It's kind of a better alternative to a flat turnaround, which I try to avoid on building wooden twisters such as this. I see you took pages off of Terminator at SFMM with the elevated tunnel (which is a cool on ride effect by the way--going into a tightly spaced tunnel and then as it opens up, go into that drop.) Superb placement!, and with the flame effects! Great testament to Wile E. Coyote (that's the way its supposed to be spelled ). 8.5/10 overall. Good work and I'm looking fowards to more!

The BeastFan

*If I sign off like that on a RCT project, that's my seal of approval

[Ryan Shrout]

Looks very good. It looks like a GCI layout but you're using the standard 2 bench cars. I like your fairly extensive use of diagonal track though. Can't wait to see more from you.

[Reapers Ashes]

images were removed sorry for the inconvenience.

Edited by deathfearsnone, 28 June 2012 - 11:58 PM.

[Ryan Shrout]

Very cool. I hope you put a pov of thi on youtube and give us the link.

[VerTigO]

Awesome. Great layout, station, supports, everything.
Where did you get those tunnels?

[The BeastFan]

^The tunnels are Mr.KI's. Go to atari, look under the RCT forums in the custom scenery area for a compiled list of scenery, click the link and you'll find it.

My question is about the supports. What set is that? I wasn't aware there was a wood set like that (and I'm a frequent visitor on atari, soon to be an active member).

[Reapers Ashes]

^The tunnels are Mr.KI's. Go to atari, look under the RCT forums in the custom scenery area for a compiled list of scenery, click the link and you'll find it.

My question is about the supports. What set is that? I wasn't aware there was a wood set like that (and I'm a frequent visitor on atari, soon to be an active member).

big burger has a set big burgers timber set has 20 cm and 30 cm wooden supports and footers also wonderful set

[The BeastFan]

To be honest CC, this thing probably could be ok with PTC's. Most of the drops are pretty straight and it doesn't have any transitions too tricky.

[Ryan Shrout]

Yeah, after watching the teaser video I agree with you.

BTW, dfn, If you'd like for one of us mods to change the topic title for you, you could put all your projects here, in stead of opening up a new thread for each one.

[Reapers Ashes]

Yeah, after watching the teaser video I agree with you.

BTW, dfn, If you'd like for one of us mods to change the topic title for you, you could put all your projects here, in stead of opening up a new thread for each one.

thats ok i have a lot of old projects that just be povs and such thanks though


images were removed sorry for the inconvenience.

Edited by deathfearsnone, 29 June 2012 - 12:00 AM.

[TwiDragon]

This coaster really makes me want to re-install it, infact I did!

I'm going to make a super cool design now!
Man, I have a lot of projects to go for.

[Reapers Ashes]

thanks i have to check out your rides

[UltraRobbie]

Some good headchoppers there

All around fun coaster. You put some good effort into this

[Ryan Shrout]

Great POV. I liked the night ride. Overall, it was a really good ride. Unique layout, good pacing, and a few surprises thrown in. Can't wait for your next project.

[Reapers Ashes]

Pov

images were removed sorry for the inconvenience.

Edited by deathfearsnone, 29 June 2012 - 12:00 AM.

[Ryan Shrout]

Another stellar ride. I love what you do with CS. Keep up the great work.

[Reapers Ashes]

POV

[UltraRobbie]

Omega was an amazing ride. You placed the CS well around, and it reminded me of Rock 'N' Rollercoaster at the beggining launch bit. It was an all round awesome coaster. It was so cool at night, it made the ride very Sci Fi. And the lights were good at night too. I just think the over bank curve kind of went slow. But other than that it was great! 9.8/10

Now SideWinder is amazing. The support effort you put into it, and the designing of the landscape must have taken ages. I love the layout of Sidewinder. It has a good terain with it, and again, you put a lot of effort into it. I think the turn after the second drop looked pretty painful, as you hit that at that speed. All around, that was pretty amazing 10/10

You are turning out to be an amazing ride maker. You might become one of those Professional ride makers. I think you might be already

[Ryan Shrout]

Sidewinder is definitely a fitting name for that ride. You did a good job of combining an airtime filled first half with a twister second half. The scenery in the second half was especially good. I would have liked to see you make more use of elevation changing turns instead of just using flat turns the majority of the ride however, as a whole its still a really good ride.

[Thunderhead]

Thats a really sweet layout for a Hyper like that, normally its just an out out and back but youve got this Y thing going on. I love different stuff like that. Very nice.

[Reapers Ashes]

Wow thanks everyone! Well heres a brand spanking new project with well you like the new features!


images were removed sorry for the inconvenience.

Edited by deathfearsnone, 29 June 2012 - 12:02 AM.

[Ryan Shrout]

Very cool track hacking. And I love the lights on the lift. Not crazy about how you went about creating a vertical-ish loop however. Oh yeah and I'm also not a fan of hacking B&M track into an Intamin ride. Still, its a nifty idea. Got a pov for us?