[Coaster Sim. Fan]

Well there is still a lot more to go and i will tell the story of the ride later buts here is an overview.

Edit: okay here is the back ground of this ride. My good computer brook on me so i am currently using a old computer that there is no way RCT3 would work on. But i managed to get NL to work pretty decently by truing down all the settings.

So being limited i actually complete an entire track lay out and i felt it was good enough to show. The Lay out is pretty much done just have minor some minor tweaking left to do.

I plan to put in supports and theme the ride but i am not making any promises on how much themeing it will have cause it depends on how much my computer can handle.

Attached thumbnail(s)

• 

This post has been edited by Coaster Sim. Fan: 15 October 2006 - 12:20 AM

[Coaster Sim. Fan]

I have done the supports for the lift and first drop. I also put in a chain return and made my first 3DS for this ride a lift hill motor seen in the picture below.

Attached thumbnail(s)

• 

[Spaminacan11]

It looks a little over-supported to me. You should take some of those out. Other than that, it looks good, but you may want to color the chain return to the color of your track.

[Whisper]

Maybe its just the angle^^

[Spaminacan11]

In that picture, I can easily count at least eight branching off supports before the end of the lift hill. In my opinion, the supports shouldn't all come down to the ground to be parallel, they should all branch out more and more if you are going to make all of the supports like that. I think that you should have one vertical support with another support branching off of the vertical one. All I am saying is that your supports just look too...similar. It just needs some variety, if you know what I mean.

[Coaster Sim. Fan]

Know that I look at it the lift does look a bit over done. I think I might go back and take at least two out.

I have a little up date of the completed first two inversions.

Attached thumbnail(s)

• 

[Coaster Sim. Fan]

The ride has know completely received supports.

Know time to work on some 3d models which i have some good ideas for.

Here are some more pictures of the ride.

[Coaster Sim. Fan]

A little up date showing a modals I have made for this ride. Still need a little vector welding / unwelding work.

Any one want to try and guess the theme

Attached thumbnail(s)

• 

[PPhoenix]

Good coaster, some parts of the coaster I dont agree on but overall its good, the colour scheme is nice and has a pretty good layout, the only thing that troubles me is the Zero G roll under the chainlift, I just dont like it personally, because by the looks of it its touching the underside of the lift.

I would rather have a giant loop going over the top of the chainlift, like Kumba

Deine Küstenmotorschiff ist gut

(your coaster is good)